The most heavy duty trailer hitch we offer for a 1987 Chevrolet K20 is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 which is rated for 16,000 lbs followed by the Curt Trailer Hitch Receiver part # C15511 which is rated for 15,000 lbs. These are both bolt-on options which are designed for models with a deep drop bumper. I recommend the Curt Trailer Hitch Receiver because of the cost savings. view full answer...
There is a great option for a heavy duty trailer hitch receiver that fits a 2019 Ram 3500 Cab and Chassis, the Curt Trailer Hitch Receiver # C15400. This behemoth of a hitch is a Class V with a 2 inch receiver and has a 2,550 lb tongue weight capacity along with a 17,000 lb towing capacity.
This hitch is designed to fit so long as your '19 Ram 3500 has a frame that is 34 inches outside to outside and I have added a link to a video install as well as the written instructions for you to... view full answer...
I recommend using the Roadmaster Quiet Hitch # RM-062 to keep the Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitches # C83JR stable in the hitch receiver. The Quiet Hitch essentially clamps the ball mount to the hitch receiver so there isn't any tolerances for the ball mount to move around in. It's a pretty simple device but it's also very effective.
Attached is a review video for you to check out! view full answer...
As long as your 1984 GMC K3500 Pickup has an 8' bed I recommend the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V # BWHDRH25198 if your truck has the Deepdrop bumper, or B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V # BWHDRH25122 if your truck has the standard or step bumper.
Both of these trailer hitch receiver's have a 1600lb maximum tongue weight rating, and 16000lb maximum trailer weight rating, but you will want to check the owner's manual of your K3500... view full answer...
Since there are no custom fit receivers for your 2020 E-450 motorhome you will need to use a universal hitch. The Curt Class 5 Universal Hitch # C47CR fits frames up to 44" wide. This is a weld-on hitch so we recommend taking it to a certified welder for installation. The maximum gross trailer weight of 16,000 lbs and tongue weight of 1,600 lbs is as heavy duty as it gets. Keep in mind, you will be limited by the towing capacity of your motorhome. view full answer...
We have the exact hitch you need for your motorhome on a 1999 Ford E-350 Super Duty chassis, the Curt Trailer Hitch Receiver # 14053.
This has the 10,000 lb towing capacity and 1,000 lb tongue weight capacity you wanted (the most available), and it does not have to be welded on. The installation will require you to drill small holes in the frame (all hitches that fit your motorhome will) and this will let you bolt the hitch right on.
I have added a link to a video review and the installation... view full answer...
To secure your Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch # C93JR to the hitch receiver I recommend using both the etrailer Hitch Receiver Lock # e98881 along with the Roadmaster Quiet Hitch # RM-062.
The locking hitch pin helps deter theft of the ball mount while the Quiet Hitch acts as an anti-rattle device and keeps the ball mount from moving inside the receiver itself.
I've attached a few review videos for you to check out! view full answer...
The Draw-Tite Trailer Hitch Receiver # 41913 is the correct heavy duty receiver for your 2019 Ram 1500. This will replace factory installed bumper ball mount style hitch that is on your Ram. I have linked a video below that shows us installing the new receiver on a 2019 Ram Bighorn. This hitch is rated for 1,700lbs of tongue weight and 15,000lbs towing or 17,000lbs towing with a weight distribution hitch. Be aware that this will not increase your towing capacity's given by Ram for your... view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225 would be a great option for what you are looking for. This has a higher weight capacity of 400 lbs and has a hitch opening behind it so that you could still attach your tow dolly to it as well. view full answer...
The etrailer.com Trailer Hitch Receiver # E98860 is not a confirmed fit for the 2018 Heavy Duty 2500 or 3500 Silverado. It is only a fit for the Light Duty 1500 models.
If you are looking for a Class IV hitch for the Heavy Duty trucks, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14010 which is for an 8 foot bed or # C14009 for a 6-1/2 foot bed. These are very strong hitch options confirmed to fit the new body style. view full answer...
We have had questions about installing a Heavy Duty Trailer Hitch Receiver on a GMC Thomas Built School Bus.
Since there are not any custom fit trailer hitch receivers for the Thomas Built School Bus you will need to use a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V # 41990-16 which fits frames up to 44" wide.
The # 41990-16 has a 1600lb tongue weight rating, and a 16000lbs trailer weight rating but you will want to verify the... view full answer...
The B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25187 is what I recommend for your 2006 Chevrolet Silverado 3500. The B&W Heavy-Duty Trailer Hitch Receiver is a direct bolt-on fit with no drilling required so it will be an excellent replacement for what you have now.
That said, this would really be the only option we have for you as the utility body you have is going to create issues for most hitches as none of them would have been designed with this in mind so you can run into... view full answer...
For a heavy duty hitch for your 2006 Chevrolet Express 3500 Cutaway I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07. The problem with using a hitch like the etrailer Trailer Hitch Receiver # e98861 is that it is designed for the cargo and passenger van, not the cutaway, so it has a small hitch drop in order to clear the factory bumper.
The # 41991-07 has a weld on installation and will fit vehicles with frames up to 62" with... view full answer...
The higher the trailer hitch capacity the more steel is used to make the hitch. Higher capacity (10K) hitches like what you are describing usually have a 2-1/2 inch square cross tube or larger (up to 3 inch) so you can measure to determine if you have the space for that size.
Please note that modifying a trailer hitch will make its capacity unknown and the heating of the hitch to weld it can weaken the hitch (unless it was designed to be welded on).
The best recommendation I can make... view full answer...
Yes! What you need is a heavy duty receiver hitch welded onto your trailer to get that heavy weight capacity. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. It is a Class V hitch, but also has the 2" hitch receiver that is popular for hitch accessories like bike racks and cargo carriers.
With a 1,600 lb tongue weight capacity, this will be more than enough for your needs. This hitch # 41990-07 has a 7-inch drop which is determined by the mounting... view full answer...
I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15325. It is heavy duty and will be able to handle anything your truck can.
For an extension we have several options depending on how much room you actually need. Keep in mind that the extension will lower the max weight and tongue weight of the hitch by 1/3. If you need a lot of extra space you can use the Curt Extender for 2" Hitch Receivers -18" Long # C45796 or the Curt Hitch Extender for 2" Trailer Hitches... view full answer...
For as large, powerful, and heavy as the Bulldog Winch Heavy-Duty Series Off-Road Winch # BDW94FR you'd need to look into something well-reinforced to mount this to. Especially if you wanted to attach it to a hitch. Probably best option would be a fabricator like you mentioned. view full answer...
You could install the Mount-n-Lock Heavy-Haul'r RV Bumper Replacement Kit # MO94VR on your travel trailer and you'd be able to use it to carry a bike rack like the Swagman XC Traveler part # S64663 which would attach directly to it. view full answer...
I recommend securing the Curt Heavy Duty Forged Ball Mount # C83JR to the 2-1/2" hitch receiver on your truck with a locking pin as it adds more peace of mind to your towing setup.
The etrailer Hitch Receiver Lock # e98881 is a great solution for this as it's easy to use and it does a great job at resisting rust and corrosion. I actually have a friend who left this on her vehicle for a few years and she said it still works good as new even after being exposed to all sorts of weather. view full answer...
Yes, the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH24400 that you referenced will fit your 2001 Ford F-150 and will clear the rear spare tire. You will have to temporarily lower the spare so that the hitch can install, but you will be able to reinstall it after. view full answer...
Go To Results